Free practical guide

    Concrete and Masonry Takeoff: Walls by Material from the PDF Plan

    Take walls by material off the PDF floor plan, count doors and windows and take the quantities over as an Excel list. Plus the measurement rules for masonry and concrete in brief.

    David Plaseller
    David Plaseller4 min read

    A concrete and masonry takeoff starts with the walls: how much brickwork, how much blockwork, how much reinforced concrete is on the floor plan? Taking walls off by hand means sorting each wall by material, measuring its length and working out the openings. PlanReader takes this groundwork off your hands: you upload the PDF floor plan and get the walls by material marked on the plan and the takeoff as an Excel list.

    Test one plan for free
    Concrete and Masonry Takeoff: Walls by Material from the PDF Plan

    Measuring a masonry wall: a worked example

    The area of a masonry wall is its length times its height, minus the openings your measurement rules deduct. An example: an external masonry wall is 12.00 m long and 2.75 m high, so the gross area is 12.00 m × 2.75 m = 33.00 m².

    • Two windows of 1.20 m × 1.50 m = 1.80 m² each: 3.60 m²
    • Front door 1.00 m × 2.10 m = 2.10 m²
    • French door 2.00 m × 2.10 m = 4.20 m²
    • Wall area, all openings deducted: 33.00 m² − 9.90 m² = 23.10 m²
    • Four lintels, sized from the opening widths: 1.20 m, 1.20 m, 1.00 m and 2.00 m, plus the bearing at each end

    The openings come to 30% of this wall, so the rule for deducting them decides the quantity. A storey has dozens of such walls in different materials. That is where PlanReader comes in.

    What PlanReader takes off the floor plan

    You upload the PDF floor plan and choose the “Architecture, shell (without drywall)” template or describe in your own words what you need. PlanReader captures:

    • Walls by material: separated as the plan shows them, for example reinforced concrete, brickwork, blockwork and precast concrete, each with wall length, wall height and wall area. You set the height for the plan.
    • Without drywall: stud partitions and wall linings stay out; they belong in the drywall takeoff.
    • Doors and windows: counted, with opening width, and marked on the plan, so you can deduct openings the way your bill of quantities requires.
    • Rooms: with number, name and area.
    • Building outline: with its area.

    Whether you need only the masonry, all walls or the whole plan is up to you.

    Every wall marked on the plan

    PlanReader draws every wall it captures onto your original PDF. You see at a glance which wall counts as masonry, which as reinforced concrete and where something is missing. Whatever you see differently, you change directly on the plan: adjust, add or delete a wall. The Excel export picks up every change.

    The takeoff as an Excel list

    What you get is a takeoff you can check: the Excel list shows every wall with material, length, height and area, for one plan or for all plans in the project. Walls, doors and windows come with their IFC class.

    Because every quantity is drawn on the plan, it can be traced. That helps when you check your quantities against the bill of quantities for your bid, and when you invoice and the client wants to know where a figure comes from.

    How masonry and concrete are measured: the rules in brief

    Measurement rules differ from country to country, and the bill of quantities or the contract says which ones apply. In the UK, the RICS New Rules of Measurement (NRM 2) cover masonry in work section 14 and in-situ concrete in work section 11:

    • Masonry walls: by area with the overall thickness stated, measured on the centre line and without applied finishes.
    • Openings in masonry: openings up to 0.50 m² are not deducted, larger ones are. Jambs, sills and other opening perimeters are measured by length.
    • Concrete: by volume, measured net. Reinforcement and voids under 0.05 m³ are not deducted.
    • Formwork and reinforcement: formwork by area, with openings up to 5 m² not deducted; bar reinforcement by weight, mesh by area.

    If your bill of quantities sets its own measurement rules, those apply. This is why PlanReader delivers the openings as well, and you decide under your contract how they go into the quantity.

    How it works

    • 1. Upload the drawing: upload a PDF floor plan and set the scale on the plan.
    • 2. Choose the template: “Architecture, shell (without drywall)” or a job of your own, for example “masonry walls only, separated by material”.
    • 3. Check on the plan: every wall is drawn on. Your team checks, adds and corrects.
    • 4. Take over the Excel: the takeoff goes straight into your estimate.

    PlanReader does the groundwork; checking and approval stay with your team.

    Frequently asked questions

    How is masonry measured?

    Wall length times wall height gives the area, minus the openings your measurement rules deduct. Under NRM 2, walls are measured by area on the centre line with the thickness stated, and openings over 0.50 m² are deducted. Where masonry is measured by volume, the wall thickness comes in as well.

    Can PlanReader separate walls by material?

    Yes, as the plan shows them: reinforced concrete, brickwork, blockwork and precast concrete, for example, are listed separately, each drawn on the plan and listed in the Excel file. The template leaves out drywall partitions.

    Which drawings do I need?

    PDF floor plans, one per storey. You set the scale on the plan and the wall height for the plan.

    Quantity takeoff by trade

    More articles in this series:

    All features at a glance: quantity takeoff from PDF drawings with PlanReader.

    ← Back to overview